CSE Support Wiki

User Tools

Site Tools

Trace: • syslog • procedures • backup
admin:syslog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
admin:syslog [2019/06/20 09:53]
peppe 		admin:syslog [2022/09/20 11:28] (current)
peppe
Line 1: Line 1:
-18/06/2019 +===== 20/09/2022 ===== 
-  * [[https://linux.slashdot.org/story/19/06/17/2018227/linux-pcs-servers-gadgets-can-be-crashed-by-ping-of-death-network-packets|tcp_sack]] workaround: Όλα τα κεντρικά μηχανήματα.+  * Αφαίρεση EMC VNXe3100 από uranus ως iSCSI 3xVolumes, αφαίρεση DAE με 6x NS-SAS δίσκους. Λειτουργία με 12x NL-SAS ως ενιαίο pool για backup μόνο. Οι υπόλοιποι δίσκοι μένουν για spare.
  
-18/06/2019+===== 18/06/2019 ===== 
 +  * [[https://linux.slashdot.org/story/19/06/17/2018227/linux-pcs-servers-gadgets-can-be-crashed-by-ping-of-death-network-packets|tcp_sack]] workaround: Όλα τα κεντρικά μηχανήματα.
   * Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch.   * Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch.
  
-19/06/2019 +===== 19/06/2019 ===== 
-  * firmware update στο HP procurve 2848 2ου rack στην έκδοση I.10.107+  * firmware update στο HP procurve 2848 2ου rack στην έκδοση I.10.107 [[admin:network|HP Procurve 2848]]
   * Εγκατάσταση debian 9.9 στο HP DL385(G1)   * Εγκατάσταση debian 9.9 στο HP DL385(G1)
  
-20/06/2019 +===== 20/06/2019 ===== 
-  * HP DL385G1 iLO upgrade to 1.96+  * HP DL385G1 iLO upgrade to 1.96 (prev 1.84)
   * eSATA external disk array installation on HP DL385G1, 4-disk RAID 1+0 via linux md   * eSATA external disk array installation on HP DL385G1, 4-disk RAID 1+0 via linux md
 +
 +==== HDD log on HP DL385G1 ====
 +
 +  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,0
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Vendor:               COMPAQ
 +  Product:              BD3008A4C6
 +  Revision:             HPB4
 +  User Capacity:        300,000,000,000 bytes [300 GB]
 +  Logical block size:   512 bytes
 +  Rotation Rate:        10033 rpm
 +  Logical Unit id:      0x500186200004070c
 +  Serial number:        3KR2FBK600007701K4S9
 +  Device type:          disk
 +  Transport protocol:   Parallel SCSI (SPI-4)
 +  Local Time is:        Thu Jun 20 23:19:02 2019 EEST
 +  SMART support is:     Available - device has SMART capability.
 +  SMART support is:     Enabled
 +  Temperature Warning:  Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART Health Status: OK
 +  
 +  Current Drive Temperature:     32 C
 +  Drive Trip Temperature:        68 C
 +  
 +  Elements in grown defect list: 1
 +  
 +  Vendor (Seagate) cache information
 +    Blocks sent to initiator = 390935534
 +    Blocks received from initiator = 506060278
 +    Blocks read from cache and sent to initiator = 2973598029
 +    Number of read and write commands whose size <= segment size = 1774895633
 +    Number of read and write commands whose size > segment size = 2140
 +  
 +  Vendor (Seagate/Hitachi) factory information
 +    number of hours powered up = 70614.57
 +    number of minutes until next internal SMART test = 110
 +  
 +  Error counter log:
 +             Errors Corrected by           Total   Correction     Gigabytes    Total
 +                 ECC          rereads/    errors   algorithm      processed    uncorrected
 +             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
 +  read:          0        0         0         0          0          0.000           0
 +  write:         0        0         0         0          0          0.000           0
 +  
 +  Non-medium error count:       60
 +  
 +  No self-tests have been logged
 +
 +  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,1
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Vendor:               COMPAQ
 +  Product:              BD3008A4C6
 +  Revision:             HPB4
 +  User Capacity:        300,000,000,000 bytes [300 GB]
 +  Logical block size:   512 bytes
 +  Rotation Rate:        10033 rpm
 +  Logical Unit id:      0x50018620001ec724
 +  Serial number:        3KR2LCPL00007704NWKB
 +  Device type:          disk
 +  Transport protocol:   Parallel SCSI (SPI-4)
 +  Local Time is:        Thu Jun 20 23:19:05 2019 EEST
 +  SMART support is:     Available - device has SMART capability.
 +  SMART support is:     Enabled
 +  Temperature Warning:  Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART Health Status: OK
 +  
 +  Current Drive Temperature:     29 C
 +  Drive Trip Temperature:        68 C
 +  
 +  Elements in grown defect list: 0
 +  
 +  Vendor (Seagate) cache information
 +    Blocks sent to initiator = 990974850
 +    Blocks received from initiator = 1603296594
 +    Blocks read from cache and sent to initiator = 2327552920
 +    Number of read and write commands whose size <= segment size = 1782220054
 +    Number of read and write commands whose size > segment size = 2005
 +  
 +  Vendor (Seagate/Hitachi) factory information
 +    number of hours powered up = 70568.57
 +    number of minutes until next internal SMART test = 110
 +  
 +  Error counter log:
 +             Errors Corrected by           Total   Correction     Gigabytes    Total
 +                 ECC          rereads/    errors   algorithm      processed    uncorrected
 +             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
 +  read:          0        0         0         0          0          0.000           0
 +  write:         0        0         0         0          0          0.000           0
 +  
 +  Non-medium error count:       60
 +  
 +  No self-tests have been logged
 +
 +  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,2
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Vendor:               COMPAQ
 +  Product:              PROLIANT 6L4I
 +  Revision:             0.20
 +  >> Terminate command early due to bad response to IEC mode page
 +  A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
 +  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,3
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Vendor:               COMPAQ
 +  Product:              BD3008A4C6
 +  Revision:             HPB4
 +  User Capacity:        300,000,000,000 bytes [300 GB]
 +  Logical block size:   512 bytes
 +  Rotation Rate:        10033 rpm
 +  Logical Unit id:      0x50018620001eb124
 +  Serial number:        3KR2LDL500007703H57Q
 +  Device type:          disk
 +  Transport protocol:   Parallel SCSI (SPI-4)
 +  Local Time is:        Thu Jun 20 23:19:12 2019 EEST
 +  SMART support is:     Available - device has SMART capability.
 +  SMART support is:     Enabled
 +  Temperature Warning:  Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART Health Status: OK
 +  
 +  Current Drive Temperature:     29 C
 +  Drive Trip Temperature:        68 C
 +  
 +  Elements in grown defect list: 0
 +  
 +  Vendor (Seagate) cache information
 +    Blocks sent to initiator = 3670494718
 +    Blocks received from initiator = 2457317184
 +    Blocks read from cache and sent to initiator = 1049212278
 +    Number of read and write commands whose size <= segment size = 2012647235
 +    Number of read and write commands whose size > segment size = 2269
 +  
 +  Vendor (Seagate/Hitachi) factory information
 +    number of hours powered up = 70539.18
 +    number of minutes until next internal SMART test = 110
 +  
 +  Error counter log:
 +             Errors Corrected by           Total   Correction     Gigabytes    Total
 +                 ECC          rereads/    errors   algorithm      processed    uncorrected
 +             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
 +  read:          0        0         0         0          0          0.000           0
 +  write:         0        0         0         0          0          0.000           0
 +  
 +  Non-medium error count:       49
 +  
 +  No self-tests have been logged
 +
 +  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,4
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Vendor:               COMPAQ
 +  Product:              BD3008A4C6
 +  Revision:             HPB4
 +  User Capacity:        300,000,000,000 bytes [300 GB]
 +  Logical block size:   512 bytes
 +  Rotation Rate:        10033 rpm
 +  Logical Unit id:      0x5001862000040488
 +  Serial number:        3KR2FD4A00007701KDKF
 +  Device type:          disk
 +  Transport protocol:   Parallel SCSI (SPI-4)
 +  Local Time is:        Thu Jun 20 23:19:14 2019 EEST
 +  SMART support is:     Available - device has SMART capability.
 +  SMART support is:     Enabled
 +  Temperature Warning:  Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART Health Status: OK
 +  
 +  Current Drive Temperature:     31 C
 +  Drive Trip Temperature:        68 C
 +  
 +  Elements in grown defect list: 0
 +  
 +  Vendor (Seagate) cache information
 +    Blocks sent to initiator = 1041536572
 +    Blocks received from initiator = 3292279049
 +    Blocks read from cache and sent to initiator = 252592360
 +    Number of read and write commands whose size <= segment size = 2110306074
 +    Number of read and write commands whose size > segment size = 1991
 +  
 +  Vendor (Seagate/Hitachi) factory information
 +    number of hours powered up = 70607.15
 +    number of minutes until next internal SMART test = 110
 +  
 +  Error counter log:
 +             Errors Corrected by           Total   Correction     Gigabytes    Total
 +                 ECC          rereads/    errors   algorithm      processed    uncorrected
 +             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
 +  read:          0        0         0         0          0          0.000           0
 +  write:         0        0         0         0          0          0.000           0
 +  
 +  Non-medium error count:      109
 +  
 +  No self-tests have been logged
 +
 +  root@dl385g1:~# smartctl -a /dev/sda
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Model Family:     Western Digital RE3 Serial ATA
 +  Device Model:     WDC WD1002FBYS-02A6B0
 +  Serial Number:    WD-WMATV8487598
 +  LU WWN Device Id: 5 0014ee 0ad172fba
 +  Firmware Version: 03.00C06
 +  User Capacity:    1,000,203,804,160 bytes [1.00 TB]
 +  Sector Size:      512 bytes logical/physical
 +  Rotation Rate:    7200 rpm
 +  Device is:        In smartctl database [for details use: -P show]
 +  ATA Version is:   ATA8-ACS (minor revision not indicated)
 +  SATA Version is:  SATA 2.5, 3.0 Gb/s
 +  Local Time is:    Thu Jun 20 23:19:29 2019 EEST
 +  SMART support is: Available - device has SMART capability.
 +  SMART support is: Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART overall-health self-assessment test result: PASSED
 +  
 +  General SMART Values:
 +  Offline data collection status:  (0x84) Offline data collection activity
 +                                          was suspended by an interrupting command from host.
 +                                          Auto Offline Data Collection: Enabled.
 +  Self-test execution status:      (   0) The previous self-test routine completed
 +                                          without error or no self-test has ever
 +                                          been run.
 +  Total time to complete Offline
 +  data collection:                (18000) seconds.
 +  Offline data collection
 +  capabilities:                    (0x7b) SMART execute Offline immediate.
 +                                          Auto Offline data collection on/off support.
 +                                          Suspend Offline collection upon new
 +                                          command.
 +                                          Offline surface scan supported.
 +                                          Self-test supported.
 +                                          Conveyance Self-test supported.
 +                                          Selective Self-test supported.
 +  SMART capabilities:            (0x0003) Saves SMART data before entering
 +                                          power-saving mode.
 +                                          Supports SMART auto save timer.
 +  Error logging capability:        (0x01) Error logging supported.
 +                                          General Purpose Logging supported.
 +  Short self-test routine
 +  recommended polling time:        (   2) minutes.
 +  Extended self-test routine
 +  recommended polling time:        ( 208) minutes.
 +  Conveyance self-test routine
 +  recommended polling time:        (   5) minutes.
 +  SCT capabilities:              (0x303f) SCT Status supported.
 +                                          SCT Error Recovery Control supported.
 +                                          SCT Feature Control supported.
 +                                          SCT Data Table supported.
 +  
 +  SMART Attributes Data Structure revision number: 16
 +  Vendor Specific SMART Attributes with Thresholds:
 +  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 +    1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
 +    3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       1125
 +    4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       37
 +    5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 +    7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
 +    9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       415
 +   10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 +   11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 +   12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       30
 +  192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       27
 +  193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       9
 +  194 Temperature_Celsius     0x0022   113   109   000    Old_age   Always       -       37
 +  196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
 +  197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
 +  198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
 +  199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
 +  200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
 +  
 +  SMART Error Log Version: 1
 +  No Errors Logged
 +  
 +  SMART Self-test log structure revision number 1
 +  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
 +  # 1  Conveyance offline  Completed without error       00%        98         -
 +  # 2  Conveyance offline  Completed without error       00%        37         -
 +  # 3  Conveyance offline  Completed without error       00%        34         -
 +  
 +  SMART Selective self-test log data structure revision number 1
 +   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 +      1        0        0  Not_testing
 +      2        0        0  Not_testing
 +      3        0        0  Not_testing
 +      4        0        0  Not_testing
 +      5        0        0  Not_testing
 +  Selective self-test flags (0x0):
 +    After scanning selected spans, do NOT read-scan remainder of disk.
 +  If Selective self-test is pending on power-up, resume after 0 minute delay.
 +
 +  root@dl385g1:~# smartctl -a /dev/sdb
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Model Family:     Western Digital RE3 Serial ATA
 +  Device Model:     WDC WD1002FBYS-02A6B0
 +  Serial Number:    WD-WMATV8594117
 +  LU WWN Device Id: 5 0014ee 0ad183a0e
 +  Firmware Version: 03.00C06
 +  User Capacity:    1,000,203,804,160 bytes [1.00 TB]
 +  Sector Size:      512 bytes logical/physical
 +  Rotation Rate:    7200 rpm
 +  Device is:        In smartctl database [for details use: -P show]
 +  ATA Version is:   ATA8-ACS (minor revision not indicated)
 +  SATA Version is:  SATA 2.5, 3.0 Gb/s
 +  Local Time is:    Thu Jun 20 23:19:32 2019 EEST
 +  SMART support is: Available - device has SMART capability.
 +  SMART support is: Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART overall-health self-assessment test result: PASSED
 +  
 +  General SMART Values:
 +  Offline data collection status:  (0x82) Offline data collection activity
 +                                          was completed without error.
 +                                          Auto Offline Data Collection: Enabled.
 +  Self-test execution status:      (   0) The previous self-test routine completed
 +                                          without error or no self-test has ever
 +                                          been run.
 +  Total time to complete Offline
 +  data collection:                (18000) seconds.
 +  Offline data collection
 +  capabilities:                    (0x7b) SMART execute Offline immediate.
 +                                          Auto Offline data collection on/off support.
 +                                          Suspend Offline collection upon new
 +                                          command.
 +                                          Offline surface scan supported.
 +                                          Self-test supported.
 +                                          Conveyance Self-test supported.
 +                                          Selective Self-test supported.
 +  SMART capabilities:            (0x0003) Saves SMART data before entering
 +                                          power-saving mode.
 +                                          Supports SMART auto save timer.
 +  Error logging capability:        (0x01) Error logging supported.
 +                                          General Purpose Logging supported.
 +  Short self-test routine
 +  recommended polling time:        (   2) minutes.
 +  Extended self-test routine
 +  recommended polling time:        ( 208) minutes.
 +  Conveyance self-test routine
 +  recommended polling time:        (   5) minutes.
 +  SCT capabilities:              (0x303f) SCT Status supported.
 +                                          SCT Error Recovery Control supported.
 +                                          SCT Feature Control supported.
 +                                          SCT Data Table supported.
 +  
 +  SMART Attributes Data Structure revision number: 16
 +  Vendor Specific SMART Attributes with Thresholds:
 +  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 +    1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
 +    3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       1100
 +    4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       44
 +    5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 +    7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
 +    9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       266
 +   10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 +   11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 +   12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       37
 +  192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       33
 +  193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       10
 +  194 Temperature_Celsius     0x0022   112   098   000    Old_age   Always       -       38
 +  196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
 +  197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
 +  198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
 +  199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
 +  200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
 +  
 +  SMART Error Log Version: 1
 +  No Errors Logged
 +  
 +  SMART Self-test log structure revision number 1
 +  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
 +  # 1  Extended offline    Completed without error       00%       131         -
 +  # 2  Conveyance offline  Completed without error       00%        32         -
 +  
 +  SMART Selective self-test log data structure revision number 1
 +   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 +      1        0        0  Not_testing
 +      2        0        0  Not_testing
 +      3        0        0  Not_testing
 +      4        0        0  Not_testing
 +      5        0        0  Not_testing
 +  Selective self-test flags (0x0):
 +    After scanning selected spans, do NOT read-scan remainder of disk.
 +  If Selective self-test is pending on power-up, resume after 0 minute delay.
 +
 +  root@dl385g1:~# smartctl -a /dev/sdc
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Model Family:     Western Digital Caviar Blue (SATA)
 +  Device Model:     WDC WD5000AAKS-00A7B0
 +  Serial Number:    WD-WMASY0139743
 +  LU WWN Device Id: 5 0014ee 000803406
 +  Firmware Version: 01.03B01
 +  User Capacity:    500,106,780,160 bytes [500 GB]
 +  Sector Size:      512 bytes logical/physical
 +  Device is:        In smartctl database [for details use: -P show]
 +  ATA Version is:   ATA8-ACS (minor revision not indicated)
 +  SATA Version is:  SATA 2.5, 3.0 Gb/s
 +  Local Time is:    Thu Jun 20 23:19:34 2019 EEST
 +  SMART support is: Available - device has SMART capability.
 +  SMART support is: Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART overall-health self-assessment test result: PASSED
 +  
 +  General SMART Values:
 +  Offline data collection status:  (0x84) Offline data collection activity
 +                                          was suspended by an interrupting command from host.
 +                                          Auto Offline Data Collection: Enabled.
 +  Self-test execution status:      (   0) The previous self-test routine completed
 +                                          without error or no self-test has ever
 +                                          been run.
 +  Total time to complete Offline
 +  data collection:                (11580) seconds.
 +  Offline data collection
 +  capabilities:                    (0x7b) SMART execute Offline immediate.
 +                                          Auto Offline data collection on/off support.
 +                                          Suspend Offline collection upon new
 +                                          command.
 +                                          Offline surface scan supported.
 +                                          Self-test supported.
 +                                          Conveyance Self-test supported.
 +                                          Selective Self-test supported.
 +  SMART capabilities:            (0x0003) Saves SMART data before entering
 +                                          power-saving mode.
 +                                          Supports SMART auto save timer.
 +  Error logging capability:        (0x01) Error logging supported.
 +                                          General Purpose Logging supported.
 +  Short self-test routine
 +  recommended polling time:        (   2) minutes.
 +  Extended self-test routine
 +  recommended polling time:        ( 136) minutes.
 +  Conveyance self-test routine
 +  recommended polling time:        (   5) minutes.
 +  SCT capabilities:              (0x303f) SCT Status supported.
 +                                          SCT Error Recovery Control supported.
 +                                          SCT Feature Control supported.
 +                                          SCT Data Table supported.
 +  
 +  SMART Attributes Data Structure revision number: 16
 +  Vendor Specific SMART Attributes with Thresholds:
 +  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 +    1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
 +    3 Spin_Up_Time            0x0003   155   149   021    Pre-fail  Always       -       5225
 +    4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       0
 +    5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 +    7 Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
 +    9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25210
 +   10 Spin_Retry_Count        0x0012   100   253   051    Old_age   Always       -       0
 +   11 Calibration_Retry_Count 0x0012   100   253   051    Old_age   Always       -       0
 +   12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       73
 +  192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       20
 +  193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       73
 +  194 Temperature_Celsius     0x0022   112   103   000    Old_age   Always       -       35
 +  196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
 +  197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
 +  198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
 +  199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
 +  200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0
 +  
 +  SMART Error Log Version: 1
 +  No Errors Logged
 +  
 +  SMART Self-test log structure revision number 1
 +  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
 +  # 1  Extended offline    Completed without error       00%     14026         -
 +  # 2  Extended offline    Completed without error       00%     10404         -
 +  
 +  SMART Selective self-test log data structure revision number 1
 +   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 +      1        0        0  Not_testing
 +      2        0        0  Not_testing
 +      3        0        0  Not_testing
 +      4        0        0  Not_testing
 +      5        0        0  Not_testing
 +  Selective self-test flags (0x0):
 +    After scanning selected spans, do NOT read-scan remainder of disk.
 +  If Selective self-test is pending on power-up, resume after 0 minute delay.
 +
 +  root@dl385g1:~# smartctl -a /dev/sdd
 +  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
 +  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +  
 +  === START OF INFORMATION SECTION ===
 +  Model Family:     Western Digital Caviar Blue (SATA)
 +  Device Model:     WDC WD5000AAKS-00A7B0
 +  Serial Number:    WD-WMASY0127191
 +  LU WWN Device Id: 5 0014ee 0ab2aee67
 +  Firmware Version: 01.03B01
 +  User Capacity:    500,107,862,016 bytes [500 GB]
 +  Sector Size:      512 bytes logical/physical
 +  Device is:        In smartctl database [for details use: -P show]
 +  ATA Version is:   ATA8-ACS (minor revision not indicated)
 +  SATA Version is:  SATA 2.5, 3.0 Gb/s
 +  Local Time is:    Thu Jun 20 23:19:35 2019 EEST
 +  SMART support is: Available - device has SMART capability.
 +  SMART support is: Enabled
 +  
 +  === START OF READ SMART DATA SECTION ===
 +  SMART overall-health self-assessment test result: PASSED
 +  
 +  General SMART Values:
 +  Offline data collection status:  (0x80) Offline data collection activity
 +                                          was never started.
 +                                          Auto Offline Data Collection: Enabled.
 +  Self-test execution status:      (   0) The previous self-test routine completed
 +                                          without error or no self-test has ever
 +                                          been run.
 +  Total time to complete Offline
 +  data collection:                (12000) seconds.
 +  Offline data collection
 +  capabilities:                    (0x7b) SMART execute Offline immediate.
 +                                          Auto Offline data collection on/off support.
 +                                          Suspend Offline collection upon new
 +                                          command.
 +                                          Offline surface scan supported.
 +                                          Self-test supported.
 +                                          Conveyance Self-test supported.
 +                                          Selective Self-test supported.
 +  SMART capabilities:            (0x0003) Saves SMART data before entering
 +                                          power-saving mode.
 +                                          Supports SMART auto save timer.
 +  Error logging capability:        (0x01) Error logging supported.
 +                                          General Purpose Logging supported.
 +  Short self-test routine
 +  recommended polling time:        (   2) minutes.
 +  Extended self-test routine
 +  recommended polling time:        ( 140) minutes.
 +  Conveyance self-test routine
 +  recommended polling time:        (   5) minutes.
 +  SCT capabilities:              (0x303f) SCT Status supported.
 +                                          SCT Error Recovery Control supported.
 +                                          SCT Feature Control supported.
 +                                          SCT Data Table supported.
 +  
 +  SMART Attributes Data Structure revision number: 16
 +  Vendor Specific SMART Attributes with Thresholds:
 +  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 +    1 Raw_Read_Error_Rate     0x000f   100   253   051    Pre-fail  Always       -       0
 +    3 Spin_Up_Time            0x0003   157   157   021    Pre-fail  Always       -       5116
 +    4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       2
 +    5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 +    7 Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
 +    9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       5
 +   10 Spin_Retry_Count        0x0012   100   253   051    Old_age   Always       -       0
 +   11 Calibration_Retry_Count 0x0012   100   253   051    Old_age   Always       -       0
 +   12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
 +  192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       3
 +  193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       7
 +  194 Temperature_Celsius     0x0022   113   095   000    Old_age   Always       -       34
 +  196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
 +  197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
 +  198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
 +  199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
 +  200 Multi_Zone_Error_Rate   0x0008   100   253   051    Old_age   Offline      -       0
 +  
 +  SMART Error Log Version: 1
 +  No Errors Logged
 +  
 +  SMART Self-test log structure revision number 1
 +  No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 +  
 +  SMART Selective self-test log data structure revision number 1
 +   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
 +      1        0        0  Not_testing
 +      2        0        0  Not_testing
 +      3        0        0  Not_testing
 +      4        0        0  Not_testing
 +      5        0        0  Not_testing
 +  Selective self-test flags (0x0):
 +    After scanning selected spans, do NOT read-scan remainder of disk.
 +  If Selective self-test is pending on power-up, resume after 0 minute delay.
 +
 +===== 24/06/2019 =====
 +
 +  * HP Procurve 2848 switches updated to latest firmware.
 +
  
admin/syslog.1561013584.txt.gz · Last modified: 2019/06/20 09:53 by peppe

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki