Differences

This shows you the differences between two versions of the page.

--- admin:poweroff [2022/02/08 12:40]
peppe created
+++ admin:poweroff [2022/04/19 12:11] (current)
peppe
@@ Line 1: / Line 1: @@
 ===== Διακοπή ρεύματος και επαναφορά =====
+PRINT BEFORE USE!
+Material may not be available during shutdown process.
+Updated 19/04/2022\\
+\\
+  * Altus KVM 10.1.2.10
+  * Cisco switch port 6: trunk for recovery
+  * Backup! Transfer to safe media!
 ==== Διακοπή ρεύματος ====
@@ Line 5: / Line 14: @@
 === Επίπεδο 1 ===
 == HP DL145G2 ==
-titan (old printserver)\\
+  - Close control units poweroff
-csforum\\
+  - titan (old printserver), iLO 10.1.2.12\\
-aeolus\\
+  - csforum, iLO 10.1.2.30\\
-glaucus\\
+  - aeolus, iLO 10.1.2.150\\
+  - glaucus\\
+  - unmount /usr/home/{students,staff,grads} from scylla\\
+== Εργαστήρια ==
+  * Shutdown/poweroff
+== 3D printers ==
+  * Tevo Tarantula poweroff
+  * Sun Ultra20 poweroff
+  * Z-printer poweroff
+  * Z-printer storage shutdown (Long button press -> shutdown procedure)
-== HP DL380G6 esxi2, 10.7.4.6 ==
+== HP DL380G6 esxi2, 10.7.4.6, iLO 10.1.2.102 ==
-titan-printserver (new printserver)\\
+  - titan-printserver (new printserver, titan-new)\\
-mysql-server\\
+  - mysql-server\\
-calliope-www (cse www)\\
+  - calliope-www (cse www, calliope-vlan74)\\
-== HP DL380G6 esxi3, 10.7.4.7 ==
+== HP DL380G6 esxi3, 10.7.4.7, iLO 10.1.2.103 ==
-zeus-debian\\
+  * zeus-debian (zeus-vlan74)\\
-== HP DL380G7 esxi4, 10.7.4.125 ==
+== HP DL380G7 esxi4, 10.7.4.125, iLO 10.1.2.104 ==
-engineering www (jupiter)
+  * engineering www (jupiter)
-== Dell R630 #1 (UP) ==
+== Dell R630 #1 (UP), 10.1.2.40, iLO 10.1.2.110 ==
-examservers
+  * examservers (NOT!)
 === Επίπεδο 2 ===
-== Dell R630 #1 (UP) ==
+== Dell R630 #1 (UP), 10.1.2.40, iLO 10.1.2.110 ==
-gaia
+  * gaia
-== HP DL380G6 esxi3, 10.7.4.7 ==
+== HP DL380G6 esxi3, 10.7.4.7, iLO 10.1.2.103 ==
-uranus-debian
+  * uranus-debian
 === Επίπεδο 3 ===
-== EMC VNXe3100 ==
+== EMC VNXe3100, 10.7.4.9 ==
-poweroff procedure (+WAIT, UNPLUG!)
+Poweroff procedure (+WAIT, UNPLUG!)
+  Shut down the system
+  The shutdown process can take between 25 to 45 minutes to complete.
+  During this time, the connection to the system will be lost and
+  you will not have access to Unisphere or the online help.
+. From Unisphere, select Settings > Service System.
+. Enter the Service password to access the Service System page.
+. Under Service Actions, select Shut Down System.
+. Click Execute service action to shut down the
+     storage processors (SPs).
+. In the Service Confirmation dialog box, click OK.
+. Check the status of the shutdown process by looking at the
+     SP LED indicators:
+  On VNXe3100 and VNXe3150 systems, the shutdown process is complete
+  when only the Storage Processor Power LEDs are blinking and all
+  other Storage Processor LEDs are off.
+. If you are relocating hardware, disconnect cables in the
+     following order:
+  Disconnect the power cables from disk-processor enclosure (DPE)
+  to power down the SPs.
+  Disconnect the power cable from the DAEs to power them down.
 == HP DL145G2 ==
-scylla
+  - scylla, iLO 10.1.2.45\\
-rescue
+  - rescue, iLO 10.1.2.49\\
-== HP DL380G7 esxi4, 10.7.4.125 ==
+== HP DL380G7 esxi4, 10.7.4.125, iLO 10.1.2.104 ==
-gatepc73\\
+  - gatepc73\\
-gatepc74\\
+  - gatepc74\\
-gatepc76\\
+  - gatepc76\\
-clonezilla SE\\
+  - clonezilla SE\\
-charybdis\\
+  - charybdis\\
+== ESXi(s) ==
+  * Shutdown 10.7.4.6
+  * Shutdown 10.7.4.7
+  * Shutdown 10.7.4.125
+  * Shutdown 10.1.2.40
+  * Shutdown 10.1.2.41
+== Power cables ==
+  - Unplug all machines
+  - Turn off, unplug 2x online UPSs
+  - Turn off, unplug 1x rescue UPS (in rack)
+  - Unplug Cisco switch
+  - Unplug HP switch
+  - Unplug mgmt switch
+  - Unplug ATEN KVM
 == personal machines ==
-poweroff
+  * poweroff
 ==== Επαναφορά ρεύματος ====
+Poweron
+=== Επίπεδο 1 ===
+== Power on ==
+  - ATEN KVM
+  - Cisco switch
+  - HP switch
+  - mgmt switch
+  - 2x online UPSs
+  - 1x rescue UPS
+== EMC VNXe3100, 10.7.4.9 ==
+  Power up the system (20+ minutes! Check www!)
+  To power up a system that is fully powered down:
+. Reconnect the power cables to each DAE in the following exact order:
+  DAE 0
+  DAE 1
+  DAE 2
+  Power up any remaining DAEs in ascending order.
+  The green Power Status LED powerlines.gif on each DAE turns on.
+  For more information on the LEDs, see System LED displays.
+. Reconnect the power cables to each SP in exactly this order:
+  SP A
+  SP B
+  The green Power Status LED on each SP turns on.
+== HP DL380G7 esxi4, 10.7.4.125, iLO 10.1.2.104 ==
+  - gatepc73\\
+  - gatepc74\\
+  - gatepc76\\
+  - clonezilla SE\\
+== HP DL145G2 ==
+  - titan (old printserver), iLO 10.1.2.12\\
+  - csforum, iLO 10.1.2.30\\
+  - aeolus, iLO 10.1.2.150\\
+  - glaucus\\
+  - scylla, iLO 10.1.2.45\\
+  - rescue, iLO 10.1.2.49\\
+=== Επίπεδο 2 ===
+== HP DL380G6 esxi3, 10.7.4.7, iLO 10.1.2.103 ==
+  * uranus-debian
+  * check students FS
+  * check grads FS
+  * check staff FS
+  * check quotas
+== Dell R630 #1 (UP), 10.1.2.40, iLO 10.1.2.110 ==
+  * gaia
+=== Επίπεδο 3 ===
+== HP DL380G6 esxi2, 10.7.4.6, iLO 10.1.2.102 ==
+  - calliope-www (cse www)\\
+  - titan-printserver (new printserver)\\
+  - mysql-server (NOT!)\\
+== HP DL380G6 esxi3, 10.7.4.7, iLO 10.1.2.103 ==
+  * zeus-debian\\
+== HP DL380G7 esxi4, 10.7.4.125, iLO 10.1.2.104 ==
+  - engineering www (jupiter)\\
+  - charybdis (NOT!)\\
+== Dell R630 #1 (UP), 10.1.2.40, iLO 10.1.2.110 ==
+  * examservers (NOT!)
+== scylla mounts ==
+  * mount /usr/home/{students,staff,grads}
+== Εργαστήρια ==
+  * Power up always on clients
+== 3D printers ==
+  * Sun Ultra20 poweron (+klipper, octoprint start)
+  * Tevo Tarantula poweron
+  * Z-printer poweron
+  * Z-printer storage poweron
+== Close control units ==
+  * Power on

CSE Support Wiki

User Tools

Site Tools

Differences

Page Tools